|
Selective L.S.D. |
| To adjust the initial torque with traditional LSDs you must lower and disassemble the differential case, and then re-assemble it. With a selective LSD, however, you can select one of three initial torques by simply removing the drive shaft and rotating a camshaft-type selector to vary the load on the pressure-ring held cone spring. |
Selective L.S.D. |
This list is based on Japanese model and shown in Japanese domestic price. |
| Vehicle | Model Code | Year Model | Engine Model | Part No. | Code | List Price(JPY) | Remarks |
|---|---|---|---|---|---|---|---|
| ALTEZZA | SXE10 | 98.10- | 3S-GE | 41301-SE100 | F | Discontinued | Cutting process (6mm) on side gear shaft required. |
| GXE10 | 1G-FE | Exclusive side gear shaft required. M/T(*4), A/T(*5) | |||||
| ALTEZZA gita | JCE15W･GXE10W | 01.07- | 2JZ-GE, 1G-FE | 41301-SE100 | F | Discontinued | Cutting process (6mm) on side gear shaft required. |
| JCE10W | 01.07- | 2JZ-GE | 41301-JX001 | F | Discontinued | Cutting process (6mm) on side gear shaft required. | |
| CROWN | GS131 | 87.9-88.6 | 1G-(G)E, 1G-FE | 41301-SE100 | F | Discontinued | Side
bearing is required. (#2), Exclusive side gear shaft required. (*4) |
| 88.6-95.12 | 1G-(G)E, 1G-FE | ||||||
| 87.9-91.10 | 1G-GZE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*1) | ||
| MS135･137 | 87.9-91.10 | 7M-GE | Exclusive side gear shaft required. (*1) | ||||
| LS131 | 87.9-99.4 | 2L-(T), 2L-THE | 41301-SE100 | F | Discontinued | Exclusive side gear shaft required. (*1) | |
| UZS131 | 89.8-95.12 | 1UZ-FE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*1) | |
| JZS131･133･135 | 90.8-99.4 | 1JZ-GE, 2JZ-GE | Exclusive side gear shaft required. (*1) | ||||
| GS･LS141 | 91.10-95.8 | 1G-FE, 2L-TE | 41301-SE100 | F | Discontinued | Exclusive side gear shaft required. (*1) | |
| JZS141 | 91.10-95.8 | 1JZ-GE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*1) | |
| JZS143･145 | 91.10-95.8 | 2JZ-GE | |||||
| JZS155 | 95.8-01.8 | 2JZ-GE | Exclusive side gear shaft required. (*2), 97.7-(※1) | ||||
| JZS151･153･157 | 95.8-01.8 | 1JZ-GE, 2JZ-GE | 41301-SE100 | F | Discontinued | Cutting process (6mm) on side gear shaft required. | |
| GS171 | 99.8-03.12 | 1G-FE | Exclusive side gear shaft required. (*4) | ||||
| JZS171 | 01.8-03.12 | 1JZ-FSE | Cutting process (6mm) on side gear shaft required. | ||||
| JZS171(4A/T) | 99.8-03.12 | 1JZ-GE | Cutting process (6mm) on side gear shaft required. | ||||
| 1JZ-GTE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*2) | |||
| JZS171(5A/T)･175 | 99.8-03.12 | 1JZ-GE, 2JZ-FSE | Cutting process (6mm) on side gear shaft required. | ||||
| JZS173･179 | 99.8- | 1JZ-GE, 2JZ-GE | 41301-SE100 | F | Discontinued | Cutting process (6mm) on side gear shaft required. | |
| SUPRA | GA70 | 86.2-88.8 | 1G-(G)E | 41301-SE100 | F | Discontinued | Side
bearing is required. (#1) (Bearing replacement unnecessary for 1G-G model with optional L.S.D.) Exclusive drive shaft required. (*5) (Shaft replacement unneccesary for vehicle with optional L.S.D.) |
| 88.8-90.8 | 1G-FE | Exclusive side gear shaft required. (*5) | |||||
| 1G-GE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*1) | |||
| 86.2-90.8 | 1G-GTE | ||||||
| 90.8-93.5 | 1G-GE､1G-GTE | For
vehicle with factory-equipped L.S.D., exclusive side gear shaft required. (*1) |
|||||
| MA70 | 86.2-90.8 | 7M-GTEU | |||||
| JZA70 | 90.8-93.5 | 1JZ-GTE | For
vehicle with factory-equipped L.S.D., exclusive side gear shaft required. (*1) |
||||
| GRAND HIACE | KCH･VCH10,
KCH･VCH16 model with optional L.S.D. |
5VZ-FE 1KZ-TE | 41301-JX001 | F | Discontinued | Rear, For KCH･VCH10, Exclusive side gear shaft required. (*1)×2 | |
| KCH･VCH16 model w/o optional L.S.D. |
5VZ-FE 1KZ-TE | 41301-SE100 | F | Discontinued | Rear, Cutting process(6mm) may required on original side gear shaft. | ||
| GRANVIA | KCH･VCH10, KCH･VCH16 model with optional L.S.D. |
5VZ-FE 1KZ-TE | 41301-JX001 | F | Discontinued | Rear, For KCH･VCH10, Exclusive side gear shaft required. (*1)×2 | |
| RCH11, KCH･VCH16 model w/o optional L.S.D. |
5VZ-FE 1KZ-TE | 41301-SE100 | F | Discontinued | Rear, Cutting process(6mm) may required on original side gear shaft. | ||
| LAND CRUISER | UZJ100W, HDJ101K | 98.1- | 2UZ-FE, 1HD-FTE | 41301-JX001 | F | Discontinued | For
front Cutting process (6mm) on RH side gear shaft required. |
| REGIUS | KCH40G･W, KCH46,
RCH47 model with optional L.S.D. |
1KZ-TE 3RZ-TE | 41301-JX001 | F | Discontinued | Rear, For KCH40, Exclusive side gear shaft required. (*1)×2 | |
| RCH41W, RCH47,
KCH46 model w/o optional L.S.D. |
3RZ-FE, 3RZ-TE, 1KZ-TE | 41301-SE100 | F | Discontinued | Rear, Cutting process(6mm) may required on original side gear shaft. | ||
| SOARER | GZ20 | 86.1-89.1 | 1G-(G)E | 41301-SE100 | F | Discontinued | Side
bearing is required. (#2) (Bearing replacement unnecessary for vehicle after 88.6) |
| 86.1-88.7 | 1G-GTE | 41301-JX001 | F | Discontinued | |||
| 88.7-91.4 | For
M/T model, Exclusive side gear shaft required. (*1) (Shaft replacement unneccesary for vehicle with optional L.S.D.) |
||||||
| 89.1-91.4 | 1G-FE | 41301-SE100 | F | Discontinued | |||
| 1G-GE | For M/T model | ||||||
| 41301-JX001 | F | Discontinued | For
A/T model, Exclusive side gear shaft required. (*1) (Shaft replacement unneccesary for vehicle with optional L.S.D.) |
||||
| MZ20･21 | 86.1-91.4 | 7M-GTEU | 41301-JX001 | F | Discontinued | ||
| SUPRA | GA70 | 86.2-88.8 | 1G-(G)E | 41301-SE100 | F | Discontinued | Side
bearing is required. (#1) (Bearing replacement unnecessary for 1G-G model with optional L.S.D.) Exclusive drive shaft required. (*5) (Shaft replacement unneccesary for vehicle with optional L.S.D.) |
| 88.8-90.8 | 1G-FE | Exclusive side gear shaft required. (*5) | |||||
| 1G-GE | 41301-JX001 | F | Discontinued | Exclusive side gear shaft required. (*1) | |||
| 86.2-90.8 | 1G-GTE | ||||||
| 90.8-93.5 | 1G-GE､1G-GTE | For
vehicle with factory-equipped L.S.D., exclusive side gear shaft required. (*1) |
|||||
| MA70 | 86.2-90.8 | 7M-GTEU | |||||
| JZA70 | 90.8-93.5 | 1JZ-GTE | For
vehicle with factory-equipped L.S.D., exclusive side gear shaft required. (*1) |
||||
| TOURING HIACE | KCH40G･W, KCH46,
RCH47 model with optional L.S.D. |
1KZ-TE 3RZ-TE | 41301-JX001 | F | Discontinued | Rear, For KCH40, Exclusive side gear shaft required. (*1)×2 | |
| RCH41W, RCH47,
KCH46 model w/o optional L.S.D. |
3RZ-FE, 3RZ-TE, 1KZ-TE | 41301-SE100 | F | Discontinued | Rear, Cutting process(6mm) may required on original side gear shaft. |
| Exclusive side gear shaft | Part No. | Code | Qty | List Price(JPY) | Remarks |
|---|---|---|---|---|---|
| *1 | 41309-14060 | 2 | Toyota Genuine Part | "0" or process on original shaft | |
| *2 | 41309-22050 | 2 | Toyota Genuine Part | "0" | |
| *3 | 41309-22040 | 2 | Toyota Genuine Part | "0" | |
| *4 | 41309-22060 | 2 | Toyota Genuine Part | "0" | |
| *5 | 41309-14050 | 2 | Toyota Genuine Part | "0" | |
| Side bearing | Part No. | Code | Qty | List Price(JPY) | Remarks |
| #1 | 90368-50024 | 2 | Toyota Genuine Part | "0" | |
| #2 | 90368-50006 | 2 | Toyota Genuine Part | "0" |